Connect rate: what a dialer can and cannot change.
A cold calling connect rate is the share of dials that a person answers, and ringing more lines does not raise it. Gong measured 5.4% for the average rep, which is about 19 dials for one conversation. On 5 lines the same people are reached sooner: at 25 rounds an hour, about 10 minutes between conversations instead of 44.
An example, not a benchmark. 25 is 100 dials over 4 hours, where our dial math calculator starts.
solo
1 line
- Wait between conversations
- 44 min
- Conversations an hour, at most
- 1.4
- Phones rung an hour
- 25
- Dials per conversation
- 18.5
double
2 lines
- Wait between conversations
- 23 min
- Conversations an hour, at most
- 2.6
- Phones rung an hour
- 50
- Dials per conversation
- 19
triple
3 lines
- Wait between conversations
- 16 min
- Conversations an hour, at most
- 3.8
- Phones rung an hour
- 75
- Dials per conversation
- 19.6
five at a time
5 lines
- Wait between conversations
- 9.9 min
- Conversations an hour, at most
- 6.1
- Phones rung an hour
- 125
- Dials per conversation
- 20.6
At 5.4% and 25 dials an hour, one line waits about 44 min between conversations and 5 lines wait about 9.9 min. The connect rate did not move.
Each strip is one hour and each mark is a conversation, spaced at the average wait. Real hours come in clumps. The figures are a ceiling: a round is taken to last as long as one dial, and minutes spent talking are minutes not spent dialing.
Four published rates, four ways of counting
Two studies and two vendor claims. None of them can be set beside another without reading what it counts.
| Who says it | The figure | What it counts |
|---|---|---|
| Gong Labs[1] | 5.4% and 13.3% | Calls a prospect answered, divided by the rep’s dials. The first figure is the average rep, the second the top quarter of reps. From Gong’s study of more than 300 million cold calls. |
| Belkins[2] | 9.9% and 24.5% | Dials where any live person picked up, gatekeepers and wrong people included. The first figure is per dial. The second is per prospect, across an average of three attempts each. More than 175,000 dials logged in 2025. |
| Orum[3] | 5.3% | A platform-wide connect rate of 5.3% (2024), stated by Orum about its own customers in a comparison with a competitor. |
| PhoneBurner[4] | Over 10% | Its homepage says its dialer “helps teams reach over 10% answer rates”. An answer rate, in marketing copy, with no definition beside it. |
Who has to answer?
Gong counts the prospect. Belkins counts anyone alive, the receptionist included. The same hour of calling scores higher on the second count.
Per dial, or per prospect?
Belkins’ 9.9% becomes 24.5% when the same people are called about three times. The list did not change, only the way of counting it.
Whose calls?
A study across many companies tells you about callers in general. A vendor’s platform figure tells you about the customers that vendor has, and their lists.
Five at a Time has published no connect rate, so there is no fifth row. When we have a figure we would defend, it will go here with what it counts.
What lines change is the wait
The same list at Gong’s 5.4%, on one line and on 5.
- One line
18.5 dials per conversation
1 ÷ 0.054. At 25 dials an hour that is a conversation about every 44 minutes.
- 5 lines
20.6 dials per conversation
A round gets an answer 24.2% of the time, so 4.1 rounds of 5. At 25 rounds an hour that is a conversation about every 10 minutes.
Look at the big numbers before the small ones. On 5 lines each conversation costs more dials, 20.6 against 18.5, because some rounds get two answers and you can only take one. Counted as conversations per dial, your rate goes slightly down: 4.8% against 5.4%.
What you get for those dials is your time back. Conversations come 4.5 times as often, and the minutes you used to spend listening to ringing are spent talking. You are paying for time with dials.
The dials are not free. Every answered call bills at least a minute, voicemail included, which how dialer minutes work covers. And the second person who answers a round gets hung up on, which how many lines to dial puts a number on.
What moves the rate itself
Five things, none of them the number of lines.
- the list
Gong’s top quarter of reps connect on 13.3% of dials and its average rep on 5.4%[1]. Part of the gap, by Gong’s account, is housekeeping: the top reps mark bad numbers so a dead one is never dialed twice. A dead number is a dial that can only lower your rate.
- the label
A Spam Likely label on your caller ID works against you on every dial. We have no verified figure for how much. Why numbers get flagged covers the calling patterns that earn the label.
- the number
On Five at a Time, each call goes out from the number nearest the lead’s area code. Each business gets its own five local numbers, picked from the area codes its lead list has most of. We publish no figure for what a local number adds.
- the hour
Who picks up depends on when you ring. On Five at a Time, leads are skipped before 8am and after 6pm in the lead’s local time, read from the area code. The season moves it too: Belkins found July had the highest connect rate of its year, 12.5%[2].
- the second try
Belkins’ per-dial rate was 9.9% and its per-prospect rate 24.5%, across about three attempts a prospect[2]. One dial reaches a tenth of that list. Coming back reaches a quarter of it.
Three things sold to raise it
What each one does to the sum. We have tested none of the products named.
Answer scoring
TitanX calls it Phone Intent: “Know who answers before reps dial”. It claims three times the conversations from half the dials[6]. PhoneBurner sells an add-on called Connect Scores, which skips numbers unlikely to connect[5].
What it does to the sum: the rate rises because dials fall. The numbers skipped were never called. Ask the vendor for conversations an hour before and after, which cannot be improved by dialing less.
Branded caller ID
Your company name shows on the phone as it rings. Aircall lists it at $0.08 a call[7]. We do not offer it, and we do not guarantee that a particular caller ID name displays.
What it does to the sum: if it works, p goes up for every dial. We have no measurement and will not borrow one. Split your list in two, call both halves in the same hours, and count conversations.
More lines
Orum, Five at a Time and every other parallel dialer. The pitch is more conversations an hour, and the sum above is how it is delivered.
What it does to the sum: p stays where it was. Rounds get an answer more often, so the wait drops. That is the whole product, ours included.
That is the answer to “is Orum or TitanX better for improving connect rates”. Orum rings more numbers at once and leaves the rate per dial alone. TitanX’s pitch is choosing which numbers to ring. Those are two products for two problems, and a team could buy either, both or neither.
You want the wait cut, and the numbers handled
Five at a Time rings 1 to 5 lines from 5 local numbers that belong to your business, picked from the area codes your list has most of, for $150 a seat a month. How a round works.
You want the same sum for the lowest bill
DialSheet is free for one person on one line, and $29 a seat with 2 to 5 parallel lines on your own Twilio account[8]. How the two compare.
Connect rate questions
What is a good connect rate for cold calling?
Gong Labs measured 5.4% for the average rep and 13.3% for the top quarter of reps, counting calls a prospect answered. Belkins measured 9.9% per dial across more than 175,000 dials in 2025, counting any live person who picked up. The two count differently, so compare your rate with the one that counts the way you do.
How is connect rate calculated?
Calls a person answered, divided by dials made. Check three things before comparing two rates: whether the person has to be the prospect or can be anyone, whether voicemail is left out, and whether the rate is per dial or per prospect across several attempts.
Does a parallel dialer increase connect rate?
No. Ringing 5 lines does not change the chance that any one dial is answered. It changes the wait. At 5.4% and 25 dials an hour, one line waits about 44 minutes between conversations and 5 lines wait about 10.
How many dials does it take to get one conversation?
One divided by your connect rate. At Gong's 5.4% average that is about 19 dials, and at its top-quartile 13.3% about 8. On 5 lines at 5.4% it is about 4.1 rounds, which is 20.6 dials.
Is Orum or TitanX better for improving connect rates?
They do different jobs. Orum is a parallel dialer: it rings several numbers at once, which shortens the wait and leaves the rate per dial alone. TitanX sells answer scoring, in its words "Know who answers before reps dial", which raises the rate by choosing which numbers get dialed. We have tested neither.
Does branded calling improve pickup rates?
We have no measurement of our own and will not borrow one. It is sold per call (Aircall lists it at $0.08 a call), so test it on your own list: split the list in two, call both halves in the same hours, and compare conversations. Five at a Time does not offer branded caller ID.
Does local presence raise connect rates?
We publish no figure for it. Five at a Time calls from the number nearest the lead's area code, from 5 local numbers that belong to your business, and makes no promise about how many more people answer.
What is Five at a Time's connect rate?
We have not published one. A connect rate belongs to a list and the numbers calling it more than to a dialer, and a figure from our customers would not tell you what your list will do.
Sources
- Gong Labs, "The hidden power of cold calling: insights from 300M calls". Counts calls answered by a prospect, divided by dials: 5.4% for the average rep, 13.3% for the top quartile. Read November 21, 2026.
- Belkins, cold calling benchmarks (June 26, 2026). More than 175,000 dials from 2025. Counts any live person: 9.9% per dial, 24.5% per prospect. Read November 21, 2026.
- Orum, "Orum vs. Nooks" (2024). Orum’s own connect-rate and volume claims. Read November 13, 2026.
- PhoneBurner, homepage. "Choose between single-line or our new multi-line dialing mode". Read November 21, 2026.
- PhoneBurner, pricing page. Three plans with prices; lists power dialing and no line count. Read November 21, 2026.
- TitanX, homepage. Phone Intent, “Know who answers before reps dial”, and TitanX’s own claim of three times the conversations from half the dials. Read November 21, 2026.
- Aircall, pricing page. Prices shown for the United States, billed annually; minimum 3 licences. Read November 21, 2026.
- DialSheet, pricing page. Read November 14, 2026.
Other companies change their prices and plans without telling us. If something here is out of date, tell us and we will fix it.
one at a time is for people with time.
10 conversations or one day on three lines, free. No card and no business check. Nothing is charged when the trial ends. To keep dialing you verify your business, save a card and start the plan at $150 a seat a month.
Start free trialSee pricing or read the refund policy first.